i.MX RT1160 Crossover MCU Dual-Core Arm® Cortex®-M7 and Cortex-M4

Roll over image to zoom in

Block Diagram

i.MX RT1160 Crossover MCU

i.MX RT1160 Crossover MCU

Features

Multicore Processing

  • Arm Cortex®-M7 core up to 600 MHz and a power efficient Cortex®-M4 core up to 240 MHz

Software and Tools

  • MCUXpresso developer experience
    • Selection of IDE choices
    • Pin, clock, peripheral, security and memory config tools
    • Security programming and provisioning tools
    • Software development kit (SDK)
  • Zephyr RTOS support

Memory

  • Boot ROM (256 KB)
  • On-chip RAM (1 MB in total)
    • Configurable 512 KB RAM shared with M7 TCM
    • 256 KB RAM shared with M4 TCM
  • External memory interfaces
    • 8/16/32-bit SDRAM, up to SDRAM-133/SDRAM-166/SDRAM-200
    • 8/16-bit SLC NAND FLASH

Graphics and HMI

  • Parallel RGB LCD interface (eLCDIF)
  • Parallel RGB LCD Interface Version 2 (LCDIFv2)
  • MIPI Display Serial Interface (MIPI DSI) with PHY integrated
  • SPDIF input and output
  • PDM microphone interface with 4 pairs of inputs
  • Asynchronous Sample Rate Converter (ASRC)
  • Generic 2D (PXP)
  • Vector Graphics Processing
  • Parallel Camera Sensor Interface (CSI)
  • MIPI Camera Serial Interface (MIPI CSI) with PHY integrated

Connectivity

  • Two USB 2.0 OTG controllers with integrated PHY interfaces
  • Two Ultra Secure Digital Host Controller (uSDHC) interfaces with eMMC 5.0 and SD/SDIO 3.0 compliance
  • One 10M/100M Ethernet controller with support for IEEE1588
  • One Gigabit Ethernet controller with support for AVB
  • Twelve universal asynchronous receiver/transmitter (UARTs) modules
  • Six I²C modules
  • Six SPI modules
  • Three FlexCAN (with Flexible Data-rate supported) modules
  • Two EMV SIM modules

Analog

  • Two Analog-Digital-Converters (ADC), which supports both differential and single-end inputs
  • One Digital-Analog-Converter (DAC)
  • Four Analog Comparators (ACMP)

Packaging

  • 289-pin MAPBGA, 14 x 14 mm, 0.8 mm pitch

Temperature and Qualifications

  • Temperature Range Options (Tj)
  • Consumer: 0 to + 95 °C
  • Industrial: -40 to +105 °C
  • Extended Industrial: -40 to +125 °C

Buy/Parametrics










































































































Documentation

Quick reference to our documentation types

1-10 of 110 documents

Compact List

Application Note (65)
Application Note Software (30)
Brochure (1)
Data Sheet (6)
Errata (2)
Reference Manual (2)
Supporting Information (1)
Technical Notes (1)
User Guide (1)
User Manual (1)

Design Files

Quick reference to our design files types.

5 design files

Hardware

Quick reference to our board types.

1-5 of 12 hardware offerings

Show All

Software

Quick reference to our software types.

1-5 of 23 software files

Show All

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

1-5 of 17 engineering services

Show All

To find additional partner offerings that support this product, visit our Partner Marketplace.

Training

1 trainings

Support

What do you need help with?